Overview
  • Powell has been providing solutions to automation and voltage loss restoration for more than 30 years. Whether the requirement is for a standalone automatic transfer switch, an automatic transfer switch with load fault protection, or a multiple source system reconfiguration with high speed transfer, Powell’s experience in providing preferred/alternate, main-tie-main, and multisource load shedding allows us to provide a solution that meets or exceeds our customer's requirements.

    • Total Transfer Time: 10 cycles, to 12 seconds
    • Communication equipment: Cellular, radio, or fiber optic
    • Programming logic: Digital or analog voltage sensing, over current protection, open or closed transitions, and synchronized transfer and returns
    • Ratings: 15kV through 38kV, 600A continuous current

  • Powell underground distribution switch enclosures are ¼ inch mild steel or stainless steel tank.  Powell SF6 devices are constructed and tested to a leak rate of 1X10-6 cubic centimeters per second leak rate. Each and every Powell SF6 device is pressurized with helium to 13 PSIG then tested using a helium mass spectrometer. Due to the fact that the molecule of helium is 4.9 times smaller than SF6 and that the test pressure is 2 times greater than the normal operation pressure the leak rate of SF6 will be much improved over the leak rate of the helium test gas.

  • Powell’s experience in the SF6 underground distribution switch applications enable us to be able to integrate our load break, fault interrupter, source transfer devices into your existing system. 

    Examples of such integration are:

    • Retrofit existing transformer mounted switches
    • Connect new SF6 switch to existing lead and paper cable
    • Assist in conversion to smart grid automation

  • The Powell Team is dedicated to supplying an entire portfolio of distribution switch products to meet the specific needs of your application and to ensure that customers and end users receive equipment that is of the highest quality and reliability. Our technical staff is ready and available for consultation to establish the final product configuration that will conform to your most specialized needs.

Specifications
  • Description
    ​SF6 Switch Tank ​1/4" welded mild steel tanks with stainless option, all external parts are corrosion resistant
    ​Switch Assembly ​Stored energy, highly durable, design tested for 2000 operations
    ​Unitized Blades ​Three-pole assembly is self-supported and self-aligned
    ​ ​
    ​Maximum Voltage Frequency BIL Load Interrupting Current Continuous Current
    ​15.5kV ​50/60 Hz ​95/110kV ​600A ​ ​600A
    ​27kV ​50/60 Hz ​125kV ​600A ​ ​600A
    ​38kV ​50/60 Hz ​150kV ​600A ​ ​600A

Discover
Support